Computer Maintenance Tips

How to Care for Computer or Computer Maintenance Tips, especially the CPU will usually only be done after a complaint or damage. I think this is less precise. In their use of computers should be done periodically at both the CPU and the monitor. Actually there are some fundamental things that we often forget to do with how to care for a computer or computer or PC maintenance tips, which can cause damage to the computer.

First seen from the point of Hardware:

The concentration of dust on the device in the CPU and Monitor. Especially on computers (PCs) which are placed in open space. High dust concentrations will cause impaired peripheral connections on the socket. Also during the rainy season or the temperature of the dust will absorb moisture and water vapor acts like a conductor who can connect short (konsleting). It also resulted in peeling off layers of insulators on the PCB, causing corrosion of copper lines. If this happens, the computer maintenance will be more difficult because there is no way other than replacing peripherals anymore ….
Cooling. In some types of computers especially old school computer has a processor temperature is high enough but has a way of cooling which I think is still lacking
Disk Space disproportionate. 80GB hard drive size is certainly not proportional if there are only 2 partitions each 40GB C and D. Though the use of System C is not more than 10 GB.
Installation of peripherals that are less fit or less robust. Usually this is common in locally assembled PCs. Often the way the installation of the motherboard or other peripherals with screws that are incomplete or less taut. It is often overlooked in how to care for or tips on computer maintenance. This can be fatal
The assembly socket which is less nancap … meaning less steady sleeppp mak … or less …. wkwkwkwk …. This also can be fatal …
Power Suply condition. This often escape attention when we take care of the computer. On the use of the old ones, most of the power supply will experience cracks in solderan components.
Power Capacity Inadequate Power Supply
Not Using Stavolt. Many people underestimate the use stavolt as well as the selection type and quality stavolt
Room temperature. Room temperature is ideal for PC around 19 degrees Celsius
Electricity is often drop-off or less power. This will cause the computer to die suddenly without process shutdown
Solderan physical condition, this particular Monitor. Most of the damage caused by solderan monitor cracks or loose due to age and heat generated during usage. It’s also almost certainly overlooked in how to care for a computer or a computer or PC maintenance tips

Both from the standpoint of Software:

Inappropriate OS, applications and volumes of data with computer specifications used.
Often use the computer for those games … heavyweight boxing … just like ... Running the games on the PC will generate a lot of space-space fragment and temporary files that slow computer performance
Viruses. The virus can lead to slow access to the computer and damage systems or data. Even in extreme conditions can cause the computer freezes / hangs. If it freezes there is no other way than pressing the restart button on the CPU. This often happens automatically when the CPU is often die without ShutDown process which means it will shorten the life of computers especially hard. Usually the virus is transmitted through the flash and the Internet for PCs which is often connected to the Internet. Also tips on selecting a less appropriate anti-virus also can affect computer performance.

By knowing the things above, to anticipate needs to be done to care for a computer or computer or PC maintenance tips in total as follows:

Clean the dust on the motherboard and other peripherals on the CPU with a paintbrush in medium and small size for corners and narrow gaps. Make a well in Power Suply way to open the case / power supply box first and see whether solderan-solderannya necessary re soldering ….
Use high pressure air (compressor) so that peripherals are completely clean of dust. Or just with Hair Dryer (hair dryer). But remember set at a low temperature so that peripherals do not melt …
Remove and reinsert the plug-socket peripherals. This is to ensure a perfect connection to the peripheral connectors … just once every PC maintenance.
Remember, Do not use liquid wash Contact Cleaner in-socket connector plug peripherals because the wrong way. Fluid Contact Cleaner difficult (very long) dry and easily makes the dust stick.
Notice how the installation of motherboards and other peripherals is there any screw is still lacking or lax. Complete and tighten the screw-screw
Customize your OS and applications with computer specifications and do not store data on the hard drive is too big. This will aggravate the performance of your PC
Make your hard drive partitions proportionally. For example 80GB Hard Disk Space Used C with no more than 5GB would be better if we make 3 partitions with 10GB for C, 35GB to 35GB for D and E. Accordingly access to systems and data loading will be faster ….
Do not use the PC for serious games unless your computer is designed for the Game. If it’s Game maniac, just use the Playstation ….
Use the appropriate antivirus and always updated, if necessary, updated every day … I most like to use the free Avira Professional 9.0 …. an important update at least every 5 days … With the antivirus that is always update will alleviate how to care for a computer or computer care tips or our PC.
Use stavolt quality. Lots of cheap and cheap stavolt can anticipate that only a small change in voltage PLN. Usually stavolt like this even though the physical size of a standard but very mild and not convincing. I tend to choose stavolt with Servo Motors because it has good stabilization. But there are also Stavolt Relay system was good but now seems very difficult to obtain …
Use a cooler room to a PC … or if not possible can be compensated by way of installation of cooling fins and Coolling Fan Extras processor if the temperature is too high above 36 degrees Celsius. This especially happens on computers jadul … wkwkwkwk
At certain times do Defragment Hard Drive to rearrange the order of the files for a lighter computer performance. But not too often ..!
Make A reinstall the OS and applications if deemed appropriate. Thoroughly re-installation once in 1 year does not seem excessive for refreshment throughout the system … especially if we want a system upgrade. (Eg from XP to XP-SP1 or XP-SP2-SP3)
Perform removal or Remove data or applications if not effective (never used) …
Frequently cleaning the Temporary files, Prefetch files, files Chokies and garbage files in the Recycle Bin.
Always do backups on the data that are important … you can mengcopynya on the CD … this is to anticipate if at any time exposed to a virus attack or fatal damage to the hard drive
Try your electricity does not drop / off during computer work. If I need to increase power supply in your home or better yet if you are equipped with UPS so that when a power failure suddenly there’s still time to save data and shutdown the computer
Do not be too long to let your computer do not use (never turned on at all in a long time). At least a minimum of every day the computer is turned on approximately 1 to 2 hours. This is to warm the inside of the CPU in order to be free from air humidity.
Do not expose your computer from shock, vibration and pounding especially when the computer is on, this is very dangerous because it can cause fatal damage to the hard drive
Do not hesitate to call a computer technician to perform maintenance on your computer, if you feel unable to do so …